Drazice OKC 100 NTR/HV 운영 및 설치 매뉴얼 - 페이지 14

{카테고리_이름} Drazice OKC 100 NTR/HV에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drazice OKC 100 NTR/HV 20 페이지. Tank-type water heaters
Drazice OKC 100 NTR/HV에 대해서도 마찬가지입니다: 작동 및 설치 매뉴얼 (17 페이지), 작동 및 설치 매뉴얼 (12 페이지)

페이지 인쇄
Drazice OKC 100 NTR/HV 운영 및 설치 매뉴얼

2.6 FIRST COMMISSIONING

After connecting the heater to the water supply, the hot water heating system, the electric
network, and after testing its safety valve (based on the valve manual attached), the heater
may be put into operation. Before opening the power supply, the tank must be filled with
water. The process of first heating must be executed by licensed professional who has to
check it. Both the hot water outlet pipe and safety armature parts may be hot.
During the heating process the pressurised connection water that increases its volume due
to heating must drip off the safety valve. In non-pressurised connection water drips off the
overflow combination faucet. When heating is finished, the set temperature and the actual
temperature of consumed water should be roughly equal. After connecting the heater to the
water main and electrical power system, and after checking the safety valve (following the
instructions attached to the valve), the heater can be put into operation.
Figure 6
- 14 -