Carlisle Fluid Technologies TC-UV-03 서비스 매뉴얼 - 페이지 7

{카테고리_이름} Carlisle Fluid Technologies TC-UV-03에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carlisle Fluid Technologies TC-UV-03 13 페이지.

페이지 인쇄

Carlisle Fluid Technologies TC-UV-03 서비스 매뉴얼

00:59

01:00

00:59

01:00

PRODUCT DESCRIPTION

The Tru-Cure UV-LED is a hand-held appliance, battery-

operated and equipped with a LED module which emits

UV and visible light. It is available in wavelength 395

nm, refering to the peak.

Use products/UV paint systems developed for

UV curing. Always check all details with your paint

supplier.

OVERVIEW

1. Trigger switch

2. Battery charge indicator

3. Lithium-ion battery

4. Release push-button for battery

5. Dust filter

6. Cover dust filter

7. Top label

SB-81-012-R1 (12/2022)

01:00

TRU-CURE UV-LED – OPERATING INSTRUCTIONS

01:00

CODE: XX

XXXX

5, 6

CODE: XX

BATTERY CHARGE INDICATOR

XXXX

Battery level, 5 step indicator.

Charge battery, symbol flashes when 0%.

OPERATION

Before every usage, check that:

• Glass is clean and free from over spray, which

decreases the intensity.

• Fan is running during operation.

• UV LED light up.

Hold Tru-Cure UV-LED approx. 100 mm/4 inches from

object to be cured. Time depends on area and material

to be cured, see paint manufacturers data sheet.

For larger areas, use sweeping motion similar when

using a spray gun.

INSTRUCTIONS TO THE OWNER

The owner of the curing device must produce clear

operating instructions, adapted to local site conditions,

and make these available to all users.

Only original spare parts may be used, to maintain the

products high safety.

Dispose of spent items at the nearest environmental

protection facility for recycling.

The UV radiation emission is:

according to EN62471 = Risk Group 3 (RG-3)

7 / 12