Drazice OKCE 200 S/2 사용자 설명서 - 페이지 3

{카테고리_이름} Drazice OKCE 200 S/2에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Drazice OKCE 200 S/2 15 페이지.

1. USE

OKCE line water heaters use only electricity for heating. Their nominal performance provides sufficient amount of

hot water for flat units, premises, restaurants, and similar establishments.

The heater tank is welded from a steel sheet; it is entirely coated with hot water resistant enamel. For additional

corrosion protection a magnesium anode is mounted in the upper part of the heater to adjust the electric potential

inside the tank, lowing the risk of corrosion. All types have the outlets of hot and cold water and a circulation

opening welded to them. The tank is insulated with 65 mm of polyurethane foam. The heater shield consists of a

steel, powder-paint coated, sheet; the connecting parts are metal coated. Under a plastic cover on the side of the

heater, there is a cleaning and revision opening ended with a flange; various performance heating units may be

mounted into the opening. The heater is to be placed on the ground.

Tanks between 100 and 250 litres are tested with the pressure of 0.9 MPa; 300 litre tanks are tested with 1.5 MPa.

OKCE 100 S/2.2 kW; OKCE 125 S/2.2 kW;

TYP

OKCE 100 S/2,2 kW

881

521

OKCE 125 S/2,2 kW

1046

621