Drazice OKH 160 NTR 작동 및 설치 매뉴얼 - 페이지 4

{카테고리_이름} Drazice OKH 160 NTR에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drazice OKH 160 NTR 14 페이지. Tank type indirect water heaters
Drazice OKH 160 NTR에 대해서도 마찬가지입니다: 작동 및 설치 매뉴얼 (16 페이지), 운영 및 설치 매뉴얼 (17 페이지), 작동 및 설치 매뉴얼 (12 페이지)

페이지 인쇄

1 PRODUCT TECHNICAL SPECIFICATION

1.1 FUNCTION DESCRIPTION

Indirect stationary heaters of NTR and NTR/HV series are used for hot service water preparation in

conjunction with another source of heating water, most often a gas boiler. Their nominal performance

provides sufficient amount of hot water for large flat units, premises, restaurants, and similar

establishments. In case of increased hot water consumption, these tanks heat water continuously,

operating similarly to flow heaters.

1.2 ADVICE FOR CUSTOMERS

1.2.1 HOT WATER CONSUMPTION

Consumption of hot water in households depends on the number of people, amount of

sanitary equipment, length, diameter and insulation of piping in the flat, or on individual

habits of users.

1.2.2 ENERGY SAVING

Hot utility water reservoir is insulated by means of a top-quality polyurethane foam with

zero CFCs content. Adjust the temperature of the heater's thermostat to that level only that

you need to run your home. Thus you will reduce electricity consumption, as well as the

amount of lime sediments on the walls of the receptacle and on the electric element's pit.

Advantages of using indirect heater:

easy installation and connection to hot water supply,

very fast hot water heating system,

enamelled steel tank ensures all hygienic requirements on the quality of hot utility

water,

built-in Mg anode increases resistance to corrosion,

good quality polyurethane insulation ensures minimum thermal losses,

connection of multiple withdrawal points,

accurate check of hot service water temperature,

possibility of connecting hot service water circulation.

- 4 -