Drazice OKHE ONE/E 50 운영 및 설치 매뉴얼 - 페이지 6
{카테고리_이름} Drazice OKHE ONE/E 50에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drazice OKHE ONE/E 50 19 페이지. Flat tank-type water heater for vertical mounting
페이지 인쇄1.3
DESIGN AND GENERAL HEATER DIMENSIONS
The heater tanks are made of a steel plate and tested by 1.5 multiple of operation pressure value. The inside
of the tank is enameled. A flange is welded onto the bottom of the tanks with a flange lid screwed to it. A
sealing ring is inserted between the flange lid and the flange. Thermowells for placing a heating element,
thermostat sensors and safety fuses are located in tone flange lid, and the safety fuses and the second flange
lids are without thermowells. An anode rod is mounted onto the M8 nut. Electric wiring is placed underneath
the plastic removable cover. Description of basic parts of the heater - Figure 1. Heater dimensions - Figure 2.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Service thermostat with external control and safety fuse
11. Drain tube
Enameled steel receptacle
Heater shell
Polyurethane insulation
The heating element well, ceramic heating unit 2000 W, OKHE ONE/E 30 - 1100 W
Thermostat sensor well and temperature indicator
Mg anode
Filling-in tube
Electric installation cover
Thermometer
Figure 1
- 6 -