Drazice OKC 125 NTR 작동 및 설치 매뉴얼 - 페이지 6

{카테고리_이름} Drazice OKC 125 NTR에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drazice OKC 125 NTR 20 페이지. Tank-type water heaters for vertical mounting
Drazice OKC 125 NTR에 대해서도 마찬가지입니다: 작동 및 설치 매뉴얼 (17 페이지), 작동 및 설치 매뉴얼 (12 페이지), 작동 및 설치 매뉴얼 (20 페이지), 작동 및 설치 매뉴얼 (18 페이지), 운영 및 설치 매뉴얼 (20 페이지), 작동 및 설치 매뉴얼 (18 페이지)

1.3 DESIGN AND GENERAL HEATER DIMENSIONS

The heater tank is made of a steel plate and tested by 0.9 MPa overpressure. The inside of the receptacle is

enamelled. A flange is welded onto the bottom of the tank with a flange lid screwed to it. A sealing ring is

inserted between the flange lid and the flange. Thermowells for placing a heating element and sensors of

regulation thermostat and safety fuse are located in the flange lid. Anode rod is mounted on M8 nut. The

water reservoir is insulated by means of polyurethane foam. Electric wiring is placed underneath the

plastic removable cover. The temperature of water can be set using the thermostat. In combined versions,

a heat exchanger is welded in the pressure tank. The heat exchanger is only intended for the heating

circuit.

- 6 -