Alen AMS12 12000 BTU AND 13.5 SEER 설치 매뉴얼 - 페이지 11

{카테고리_이름} Alen AMS12 12000 BTU AND 13.5 SEER에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alen AMS12 12000 BTU AND 13.5 SEER 17 페이지. Split type room air conditioner 9000 btu and 14.5 seer/12000 btu and 13.5 seer

페이지 인쇄

EvAPORATOR INSTALLATION (INDOOR)

4) Wiring

Prepare the power source for exclusive use with the air conditioner.

The supply voltage must comply with the rated voltage of the air conditioner.

Model

<12000Btu/h

>12000Btu/h

CAUTION

Perform the wiring with sufficient capacity. Installation legally requires a

short circuit isolator to be attached to prevent electrical shock.

Do not extend the power cable cord by cutting.

Power voltage should be in the range of 90% ~110% of rated voltage.

The plug of the air conditioner takes a grounding leg, so clients should

use a grounding socket so that the air conditioner can be

grounded efficiently.

5) Connecting Cables

i) Evaporator (Indoor) and Condensor (Outdoor) connecting cable should be Aw18 or more.

ii) Remove the panel and screw, then remove the window cover (for <12000Btu/h models).

Remove the panel screws covers , then remove the screws and take out the frame

(for model >12000Btu/h models)

iii) Connect cables according to their marks to terminals.

iv) Wrap those cables not connected with terminals with insula-

tion tapes, so that they will not touch any electrical components.

< 12000Btu/h models

Panel

Window Cover

Power Source

60 Hz 115V~

Frame

Panel

Screw

Plug socket and

fuse rating

32/25A

> 12000Btu/h models

Screw Cover

AWG (MIN)

Power Supply Cord

Connecting Cable

Code Wire

0.4"

1.6"

Terminal block of indoor unit

Frame

To outdoor

unit