Drazice OKCE 160 NTR 작동 및 설치 매뉴얼 - 페이지 6

{카테고리_이름} Drazice OKCE 160 NTR에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drazice OKCE 160 NTR 18 페이지. Tank-type water heater for vertical mounting
Drazice OKCE 160 NTR에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (13 페이지), 운영 및 설치 매뉴얼 (19 페이지)

페이지 인쇄
Drazice OKCE 160 NTR 작동 및 설치 매뉴얼

1.3 DESIGN AND GENERAL HEATER DIMENSIONS

The heater tank is made of a steel plate and tested by 0.9 MPa overpressure. The inside of the tank is
enamelled. A flange is welded onto the bottom of the tank with a flange lid screwed to it. A sealing ring is
inserted between the flange lid and the flange. Thermowells for placing a heating element, thermostat
sensors and safety fuses are located in the flange lid. An anode rod is mounted onto the M8 nut. Electric
wiring is placed underneath the plastic removable cover. Description of basic parts of the heater -Figure 1.
Heater dimensions - Figure 2 and Table 2.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Figure 1
Thermometer
heating element well
ceramic heating element 2000W
service thermostat with external control and
safety fuse
electric installation cover
cold water supply pipe
thermowell
hot water withdrawal pipe
Mg anode
enamelled steel receptacle
polyurethane insulation
heater shell
- 6 -