Bosch HUI54451UC 사용 및 관리 매뉴얼 - 페이지 11
{카테고리_이름} Bosch HUI54451UC에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch HUI54451UC 44 페이지. 800 series 27" single wall oven 800 series – stainless steel
Bosch HUI54451UC에 대해서도 마찬가지입니다: 브로셔 및 사양 (3 페이지), 사용 및 관리 매뉴얼 (44 페이지), 설치 지침 매뉴얼 (40 페이지)
페이지 인쇄
Resetting the saturation displays
Press and hold the
button.
7
Switching over the display for circulating-air mode
For circulating-air mode, the electronic control display
must be switched over accordingly:
The extractor hood must be connected and switched
▯
off.
Cleaning and maintenance
WARNING
9
RISK OF BURNS
The appliance will become hot when in use,
especially in the area surrounding the bulbs. Let
cool before cleaning.
WARNING
9
WARNING
To avoid risk of fire and explosion do not use
flammable liquids or solvents. Always unplug or
disconnect the appliance from the power supply
before servicing.
Hidden surfaces may have sharp edges. Use caution
when reaching behind or under appliance.
WARNING
9
RISK OF ELECTRIC SHOCK
Penetrating damp can cause electric shock. Only
clean appliance with a damp cloth. Prior to cleaning,
pull the plug or flip the breaker in the fusebox.
WARNING
9
RISK OF ELECTRICAL SHOCK
Moisture entering the appliance can cause an
electrical shock. Don't use a high-pressure cleaner
or steam cleaner.
WARNING
9
RISK OF INJURY
Components inside the appliance may have sharp
edges. Wear protective gloves.
Press the "+" and "-" keys simultaneously until
▯
ventilator settings 1 and 2 light up briefly on the
display panel.
Repeatedly press the button combination to switch the
▯
electronic control display back to exhaust air mode (
display) ventilator setting 1 lights up briefly).
Cleaning agents
To ensure that the different surfaces are not damaged by
using the wrong cleaning agent, follow the information in
the table. Do not use:
Harsh or abrasive cleaning agents,
▯
Cleaning agents with a high alcohol content,
▯
Hard scouring pads or cleaning sponges,
▯
High-pressure cleaners or steam cleaners.
▯
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the
cleaning agents.
Area
Cleaning agent
Stainless steel
Hot soapy water:
Clean with a dishcloth and then dry
with a soft cloth.
Clean stainless steel surfaces in
the grind direction only.
Special stainless steel cleaning
products are available from cus-
tomer service or from specialist
retailers. Apply a very thin layer of
the cleaning product with a soft
cloth.
Painted surfaces
Hot soapy water:
Clean using a damp dishcloth and
dry with a soft cloth/towel.
Do not use any stainless steel
cleaners.
Aluminum and
Glass cleaner:
plastic
Clean with a soft cloth.
Glass
Glass cleaner:
Clean with a soft cloth. Do not use
a glass scraper.
Operating con-
Hot soapy water:
trols
Clean using a damp dishcloth and
dry with a soft cloth/towel.
Risk of electric shock from pene-
trating moisture.
Risk of damage to the electronics
from penetrating moisture. Never
clean operating controls with a wet
cloth.
Do not use any stainless steel
cleaners.
11