Bosch NBA5350 0B Series 사용 설명서 - 페이지 18

{카테고리_이름} Bosch NBA5350 0B Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch NBA5350 0B Series 44 페이지.

페이지 인쇄

Basic settings

QBasic settings

T here are various settings available to you in order to

B a s i c s e t t i n g s

help use your appliance effectively and simply. You can

change these settings as required.

List of basic settings

Depending on the features of your appliance, not all

basic settings will be available.

Basic setting

™‚ Display the time

™ƒ Audible signal duration

upon completion of a cook-

ing time or timer duration

™„ Button tone that sounds

when a button is touched

™... Cooling fan run-on time

™† Amount of time until a set-

ting is applied

™‡ Enable childproof lock acti-

vation

™ˆ Water hardness**

* Factory setting (factory settings may vary depending on the appli-

ance model)

** Not available for all appliance types.

--------

Options

‹ = Hide the time

‚ = Display the time*

‚ = Approx. 10 seconds

ƒ = Approx. 30 seconds*

„ = Approx. 2 minutes

‹ = off

‚ = on*

‚ = Short

ƒ = Medium

„ = Long*

... = Extra long

‚ = Approx. 3 seconds*

ƒ = Approx. 6 seconds

„ = Approx. 10 seconds

‹ = No

‚ = Yes*

‹ = softened

‚ = soft (up to 1.3 mmol/l)

ƒ = medium (1.3 - 2.5 mmol/l)

„ = hard (2.5 - 3.8 mmol/l)

... = very hard* (above 3.8 mmol/

Changing the basic settings

The function selector must be set to the "Off" position.

Press and hold the v button for approx. 4 seconds.

The first basic setting will appear on the display,

e.g. ™‚ ‚.

Use the A or @ button to change the setting if

necessary.

Press the v button to confirm.

The next basic setting will appear on the display.

Using the v button, continue going through all the

basic settings as described above, changing the

settings if necessary using the A or @ button.

When you have finished, press and hold the

v button again for approx. 4 seconds to confirm the

settings.

All basic settings have now been applied.

You can change the basic settings again at any time.

Following a power failure, the basic factory

Note:

settings will be restored.