DrBrowns natural flow Insta-Feed AC184 사용 설명서 지침 - 페이지 4

{카테고리_이름} DrBrowns natural flow Insta-Feed AC184에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DrBrowns natural flow Insta-Feed AC184 9 페이지.
DrBrowns natural flow Insta-Feed AC184에 대해서도 마찬가지입니다: 사용 설명서 지침 (15 페이지)

페이지 인쇄

DrBrowns natural flow Insta-Feed AC184 사용 설명서 지침

WARMING BOTTLES AND FOOD JARS

1. Remove the Measuring Cup from the rear of the warmer.

2. Add DISTILLED water to the Measuring Cup, following

the Warming Guide on page 5 to determine the

amount of water to add based on your bottle type.

NOTE: These amounts are a guide only. There

temperature of the bottle or food jar you are

warming, such as starting temperature, size, and

shape. Always test the temperature before feeding

your baby.

3. Pour the DISTILLED water from the Measuring Cup directly into the Warming

or may cause damage to the unit.

4. Replace the Measuring Cup and plug in the power cord.

automatically. If the Indicator Light is on upon plugging unit in, wait for the

down for 10 minutes before using.

5. Place the bottle or food jar inside the Warming Chamber as outlined below.

• Wide Neck Bottle: Place bottle directly into Warming Chamber.

• Narrow Bottle: Place Adapter Ring on top of Warming Chamber, then place

bottle in Warming Chamber. The Adapter Ring will keep your bottle centered

over the heating plate for even warming.

NOTE: To prevent leakage when warming Dr. Brown's®

bottles, remove the internal parts, collar, and nipple/teat,

and replace with the included Storage Cap.

• Food Jar: Place food jar into the Lift-Out Basket, then place Lift-Out Basket in

Warming Chamber.

NOTE: Always remove the lid of the food jar prior to warming. After

warming cycle is complete, be sure to stir food thoroughly until it is an

even temperature throughout.

6. Press the Power Button. The Indicator Light will turn on, indicating the warming cycle

has begun.

CAUTION: Always add water and then press Power Button. If the Power

NOTE: If the Power Button is pressed without water added, the unit will shut

to allow warmer to cool before adding water and starting warming cycle.

bottle/food jar promptly to avoid overheating.

NOTE: Always test the temperature before feeding your baby. Adjust the

amount of water added to the warming chamber as needed; if the

bottle/food jar is too cold, add slightly more water next time. If the

bottle/food jar is too warm, use slightly less water next time.

8. Wait at least 10 minutes to allow warmer to cool before using again.

USE DISTILLED

WATER ONLY!

Tap water and bottled

water contain minerals

that shorten the life of this

appliance. Damage from

use of non-distilled water

will void the warranty.