Bosch VGD553FR0 사용 설명서 - 페이지 13
{카테고리_이름} Bosch VGD553FR0에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch VGD553FR0 44 페이지. Built-in oven
페이지 인쇄
Switching on the rotary spit
When using the rotisserie spit, heat the oven
Note:
using the
heating function. Insert the rotisserie spit
(
before setting the
heating function.
F
Turn the temperature selector to
1.
Turn the function selector to
2.
Pour some water into the universal pan to catch
Note:
any fat that drips out.
Removing the rotary spit
:
Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
Opening the appliance door
1.
Slowly pull the universal pan until it is halfway out of
2.
the cooking compartment.
Completely remove the universal pan from the
3.
cooking compartment and set it on the worktop.
Screw on the handle and remove the grill spit from
4.
the grill spit frame.
.
(
.
F
OTime-setting options
Y our appliance has different time-setting options.
T i m e - s e t t i n g o p t i o n s
Setting the electronic clock
You can alter the clock if you need to (e.g. from
summer to winter time).To do this, the oven must be
switched off.
Press the
and
buttons at the same time.
@
A
1.
Use the
and
buttons to set the current time.
@
A
2.
After 7 seconds, the time that has been set will be
applied.
Setting the timer
The timer has no effect on how the oven works.The
timer duration can be set to between 1 minute and 23
hours 59 minutes.
Press the
v
button.
1.
The
symbol will flash and three zeros will be
t
displayed.
Use the
and
buttons to set the required
@
A
2.
duration.
An audible signal will sound once the time has
elapsed.
Notes
To change the remaining time, press the
■
button.Then change the remaining time with the
v
and
buttons.
@
A
To cancel the timer, press the
■
the
@
and
A
buttons at the same time.
Switching off the signal tone
Press the
button to switch off the audible signal.
A
After 7 minutes, the audible signal will stop
Note:
automatically.
Changing the signal tone
Three different signal tones are available.
Press the
and
buttons at the same time.
@
A
1.
Press the
v
button.
2.
The signal tone that is currently selected is shown on
the display panel, e.g. "Tone 1".
Press the
button to select a different signal tone.
A
3.
Time-setting options
button. Then press
v
en
13