Anchor AN-MINIU1 소유자 매뉴얼 - 페이지 3
{카테고리_이름} Anchor AN-MINIU1에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor AN-MINIU1 7 페이지. Audio sound system
Anchor AN-MINIU1에 대해서도 마찬가지입니다: 사양 시트 (1 페이지), 소유자 매뉴얼 (4 페이지)
페이지 인쇄
AN-Mini/MiniVox Lite Owners Manual
Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives
signals with two independent antennae. With diversity wireless the receiver processes
the stronger signal, effectively minimizing dropouts and interference from other
transmitting sources. The antennae are mounted internally so there are no obstructions
or risk of damage.
CHANNEL SELECTION - BUILT-IN RECEIVER
Before you can use your UHF wireless system, you will need to select a wireless
frequency, set the built-in receiver, and microphone transmitter, to that channel.
1. Choose from any of the 16 available wireless channels
2. Set the wireless channel selector knob "CHANNEL" to the channel/frequency you
have chosen
NOTE: Ongoing wireless interference? The frequency you selected may be in use by other
systems in the area! Change channels until you find a clear frequency!
Use the LINE IN input jack to play pre-recorded material through the AN-Mini. The AN-Mini volume
knob controls both the audio source and microphone levels when used simultaneously.
1. Connect a mini-to-
mini patch cable
(3.5mm plugs) to the
'Line' or 'Headphone'
output of your audio
source
2. Connect the other
end to the LINE IN
input jack on the
AN-Mini control panel
3. Adjust the volume
setting of the audio
source to the desired
level
AUDIO SOURCE
HEADPHONE / OUTPUT JACK
DIVERSITY WIRELESS BY ANCHOR AUDIO
USING AN OUTBOARD MP3/CD/TAPE PLAYER
SHIELDED PATCH
CABLE*
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
RX INDICATOR LIGHTS
UHF WIRELESS
CHANNEL SELECTION
LINE IN
INPUT JACK
*CABLE SOLD SEPARATELY
MADE IN USA
SIX YEAR WARRANTY
AN-MINI WIRELESS CONTROLS
UHF WIRELESS VOLUME CONTROL
Model Shown: AN-MINIU1
3