Bosch 1500C 작동/안전 지침 매뉴얼 - 페이지 8

{카테고리_이름} Bosch 1500C에 대한 작동/안전 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 1500C 29 페이지. Gauge shear
Bosch 1500C에 대해서도 마찬가지입니다: 작동/안전 지침 매뉴얼 (33 페이지)

BM 3609929809 10/03

10/1/03

Switch is spring loaded and will snap back

automatically.

Start the tool before applying to work and let

the tool come to full speed before contacting

the workpiece. Lift the tool from the work

before releasing the switch. DO NOT turn the

switch "ON" and "OFF" while the tool is

under load; this will greatly decrease the

switch life.

Before cutting, lightly oil the cutting line.

Hold the tool at a angle 80° to 90° to the metal

surface (Fig. 2).

FIG. 2

80-90°

9:05 AM

Page 8

HAND GUARD

The hand guard protects the hands while

cutting, and deflects material downwards

and away from the operator. The hand guard

must be used at all times while using this

shear.

Excessive feed rates reduce the performance

considerably and shorten the life of the

cutters.

Sharp cutters produce good cutting results

and protects the tool.

Do not load the tool so heavily that it stalls.

Cutting curved lines: Do not tilt the tool and

work with low feed rate.

-8-