Bosch 1581AVS 작동/안전 지침 매뉴얼 - 페이지 8

{카테고리_이름} Bosch 1581AVS에 대한 작동/안전 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch 1581AVS 33 페이지. Parts diagram
Bosch 1581AVS에 대해서도 마찬가지입니다: 부품 목록 (3 페이지)

BM 2610991830 2-04

2/9/04

The following types of blades should only be

used with orbital Setting O:

1. Blades with teeth that point downward

(reverse-tooth blades).

FOOTPLATE ANGLE ADJUSTMENT

The footplate may be tilted to allow angle cuts

up to 45˚ in either direction. To adjust

footplate, loosen screw with allen wrench, slide

the footplate towards the front of the tool, and

rotate to the desired angle, as marked on the

ANGLE

SCALE

SCREW

FOOTPLATE

PROTRACTOR

(Not included)

To minimize splintering of the top surface of

the material being cut, place the anti-splinter

insert in the blade opening of the footplate.

ANTI-SPLINTER

INSERT

FOOTPLATE

10:37 AM

Page 8

2. Blades with teeth that point straight out

rather than up or down.

3. Carbide-tipped blades.

4. Grit-edge blades.

angle scale. Detent slots will hold the footplate

firmly at 45˚, and there are additional position

marks for 15˚ and 30˚ angles. Intermediate

angles may be set with a protractor. After

positioning the footplate, securely tighten

screw).

DETENT SLOTS

Note: This insert will only work with blades

that have ground sides such as T301CD,

T101B, T101D, and T101DP.

SCREW

-8-