Anchor MegaVox PRO MEGA-6000U2 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Anchor MegaVox PRO MEGA-6000U2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor MegaVox PRO MEGA-6000U2 16 페이지. Megavox pro public address system
Anchor MegaVox PRO MEGA-6000U2에 대해서도 마찬가지입니다: 카탈로그 (2 페이지), 소유자 매뉴얼 (4 페이지), 사양 (1 페이지), 소유자 매뉴얼 (4 페이지), 소유자 매뉴얼 (9 페이지), 소유자 매뉴얼 (8 페이지)
페이지 인쇄
Caring For Built-in Batteries
It is very important that you fully charge the batteries in your system
IMPORTANT:
before first use and as soon as possible after each and every use,
For longer
battery life,
even if operated only briefly to preserve battery life.
always store
your system
When The Battery LED Flashes or Won't Light
with the
The Battery LED will begin to flash
battery in a
when the battery charge is low. To
fully charged
prevent damage, the automatic
condition or
protection circuit turns the unit off
the charger
when the batteries approach their critical
plugged in.
discharge point.
Charging The Batteries - AC Power Source
The following steps outline the necessary procedure to charge the
NOTE:
batteries:
MegaVox Pro
is an AC/DC
powered unit
that can be
used while
charging.
Expected Service Time From Batteries
NOTE:
Battery service time will vary depending on the volume level, tone
When an
control settings, type of program usage and if a companion speaker
external
is used with the system. You can expect about 8-12 hours of
speaker is
operation at medium volume, 3-6 hours at full volume of continuous
powered by
music input (usually longer for speech applications).
the MegaVox
Pro, battery
service per
charge will
decrease
considerably.
1. With the MegaVox Pro power switch off, plug the Charger
into an AC outlet.
2. Connect the Charger cord into
charger input. The Charger LED
will light, indicating the batteries
are being charged.
3. When the batteries are fully charged (about 6-8 hours), the
Charger LED will flash.
BATTERY OPERATION
7