Anchor Economy Tent 40 CLASSIC PLUS 조립 지침 매뉴얼 - 페이지 3
{카테고리_이름} Anchor Economy Tent 40 CLASSIC PLUS에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor Economy Tent 40 CLASSIC PLUS 8 페이지. Frame tents
페이지 인쇄40'
CLASSIC PLUS FRAME TENTS
TUBING, FITTING & EQUIPMENT LIST
40' TUBING
• 9'4" Side Eave Bar
• 9'4" Top Bar
• 14'4" Upper Corner Support
• 10'5½" Corner Rafter Support
• 14'4" Double Tube Corner Rafter Bar
• 21'8-1/4" Double Truss Mid-Rafter
• 7' - 9' Adjustable Leg
SINGLE TUBE
DOUBLE TUBE
ORGANIZE TUBING & FITTINGS
Lay out all the canopy frame tubing and fittings on the ground forming a loose diagram of the canopy
layout. It is best to do the assembly in the approximate location that the tent will be in when assembled.
Note: A 40' x 50' frame layout is used in this manual for illustration. Go to www.economytent.com for frame
sketches for all the 40' Classic Plus frame sizes, along with a materials list for each frame size.
40'
|
ASSEMBLY INSTRUCTIONS
40' FITTINGS
6-Way Crown
Top Extension
RECOMMENDED EQUIPMENT AND MANPOWER FOR INSTALLATION:
• Six experienced installers can normally install these products in three hours or less.
• One or two 8'-10' commercially rated step ladders.
• Approved safety head gear, steel toed shoes and eye protection.
• Frame tent jacks (minimum two for a 40'x40' frame. One additional jack is recommended
for each additional 20' in length).
• Prior to laying out this or any other ETI product be sure you have thoroughly inspected
the area for any overhead or underground obstructions that may interfere with the safe
installation of this product. Please refer to IFAI anchoring and installation guidelines.
50'
6-Way Mid-Leg
Rafter Fitting
21'8" Double
Truss Rafter
6-Way
Crown Fitting
9'4"
Top Bar
6-Way Corner
Corner
6- Way
Rafter
Mid-Leg/Rafter
9'4"
Side Eave Bar
10'5½' Corner
Rafter Support
6-Way Corner
Rafter Fitting
14'4" Upper
Corner Support
14'4" Double Tube
Corner Rafter
21'8" Double
Truss Rafter
Mid-Leg/Rafter
Corner Fitting
9'4"
Side Eave Bar
Mid-Leg/
Rafter Fitting
6-Way Mid-Leg
Rafter Fitting