Anchor Economy Tent International XP Series 조립 지침
{카테고리_이름} Anchor Economy Tent International XP Series에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor Economy Tent International XP Series 3 페이지. Frame tent
페이지 인쇄XP Series Frame Tent Assembly Instructions
Recommended equipment and manpower for installa on:
Two experienced installers can normally install these products in thirty minutes or less.
One or two 4'or 6' step ladders.
Gloves
Approved safety head gear
Ground cover to protect the top
Prior to laying out this or any other ETI product be sure you have thoroughly inspected the area
for any overhead or underground obstruc ons the may interfere with the safe installa on of
this product.
1. Place the 4 eaves along with the 4 corner weldments in a square configura on on the
ground where the frame will be erected.
2. Slide the eaves into weldments locking them into posi on using the snap bu ons
crea ng a ridged perimeter.
3. Place the first cable diagonally across the frame and slide the loop ends over the steel
posts provided at each corner. Making sure the second cable is on the top of the first
cable repeat this process. You may have to elevate the corner slightly to a ach the last
loop.
800-438-3226
|
TF:
EM:
|
economytent.com