Anchor Navi-Trac 사용자 설명서 - 페이지 10
{카테고리_이름} Anchor Navi-Trac에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor Navi-Trac 16 페이지. Tent jack
Anchor Navi-Trac에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 조립 지침 (3 페이지)
페이지 인쇄ERECTING 2nd BEAM 1st
ATTACH PUSH POLE EXTENSION TO
TOP OF THE LONG LIFTING POLE.
HOOK INTO PEAK WELDMENT BRACKET
& TWIST TO SECURE. THIS WORKER
CONTROLS PEAK DURING ERECTION.
SECURING THE 1st BEAM SAFELY
ON THE LEADING 2-PC SAFETY WEBS, WORKERS
INSERT LOOSE ENDS OF UPPER SAFETY WEBS INTO
THE RATCHETS OF THE LOWER SAFETY WEBS.
ERECTING THE 2nd BEAM
10
AS THE 2ND BEAM PIVOTS
TOWARD VERTICAL, THE
TRAILING SAFETY WEBS
DRAW TIGHTER.
USING RATCHETS, ADJUST LEADING AND
TRAILING SAFETY WEBS AGAINST EACH
OTHER ON BOTH SIDES OF THE STRUCTURE
TO SECURE AND VERTICALLY ALIGN THE
BEAM
WITH 2nd BEAM SECURED BY SAFETY WEBS, THE
1st BEAM IS ROTATED TOWARD IT. (2) OR (3)
WORKERS SHOULD HOLD THE BEAM AT VERTICAL
UNTIL EAVE BARS (ER20) ARE INSTALLED (SEE
NEXT STEP).
WORKERS LIFT FIRST AT THE
PEAK, THEN SHUFFLE SIDEWAYS
TOWARD THE UPRIGHTS.