Anchor ACCLAIM 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Anchor ACCLAIM에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor ACCLAIM 2 페이지.
페이지 인쇄
BATTERY INFORMATION
AC Operation & Battery Charging
The Acclaim include an automatic charging system designed to properly charge and maintain the system's
built-in Lithium Ion battery. To charge batteries, plug the system into an AC outlet and operate as normal
while built-in batteries are charging. While unit is on, the battery fuel gauge will indicate the battery level. The
BATTERY INDICATOR LED will show solid red light when charging and will show green light when charging is
complete. Charge system overnight to replenish drained batteries.
Battery Maintenance & Storage
In order to ensure a long battery life, we encourage the following best practices for Lithium Ion battery
maintenance and storage. Do not block any ventilation openings. When your lectern is not in use, it should
be stored in a cool dry place. Do not expose your lectern to excessive heat, flames, or fire. Unplug the lectern
during lightning storms. If storing lectern for an extended period of time, leave speaker unplugged.
Battery Safety
Refer all servicing to qualified personnel. Do not attempt to remove the rechargeable Lithium Ion battery
from this product. The battery used in this device may present a risk of fire or chemical burn if mistreated.
Please recycle or dispose of your speaker and/or battery properly based on the laws and rules of your
municipality. Do not incinerate.
Interested in an extended battery warranty? Visit anchoraudio.com/extended-battery-warranty
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
CONDITION POSSIBLE SOLUTIONS
• Turn POWER switch ON
No Sound (Power LED: OFF)
• Check battery level, charge battery, or plug in AC cord
• Ensure the gooseneck mic is properly inserted into the XLR input
• Check your source audio and turn up volume of source audio
No Sound (Power LED: ON)
• Make sure all cables are completely plugged in
• Turn up volume control of input used
• Check battery level of microphone
Wireless Mic will not Connect to System
• Un-pair all microphones from the system then re-pair the microphones
• Check the Mute button on the microphone or belt pack
Connected Wireless Mic but No Sound
• Raise volume on the microphone and system
(Solid Green LED)
• Check battery level of microphone and system
• Check battery level of microphone and system
• Re-position system away from any possible interference sources
Poor Wireless Range /
• Raise system onto a higher level (speaker stand)
Poor Wireless Audio Quality
• Minimize obstructions between the system and wireless microphone
• If wireless range continues to be poor, call Anchor Audio Tech Support
• Check battery level, charge battery, or plug in AC cord
• Lower system volume
Distorted Sound
• Lower source audio volume
• Wireless belt pack - ensure Mic and/or Line Level setting is correct
• Lower the volume on the microphone (handheld or belt pack)
Excessive Feedback (Squelching)
• Do not stand within at least 10 feet in front of the speaker with the mic(s)
• Use shielded cables (Example: EX-50PPS)
Excessive Hum or Noise
• Use a balanced microphone
NEED MORE HELP?
anchoraudio.com | 800.262.4671
QUICK START MANUAL
ACC LAIM
For a complete Owner's Manual, visit anchoraudio.com
Please check your new unit carefully for any damage which may have
occurred during shipment.
*Please keep the product box(es) that your Anchor Audio product(s) was shipped in, so
it is available in the event the product(s) need to be shipped back to Anchor Audio for
any reason.
Interested in an extended battery warranty? Visit anchoraudio.com/extended-battery-warranty
100-0333-000 REV A