Anchor Beacon 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Anchor Beacon에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor Beacon 7 페이지. Anchor beacon line array battery-powered, portable line array sound system
Anchor Beacon에 대해서도 마찬가지입니다: 소유자 매뉴얼 (4 페이지), 소유자 매뉴얼 (4 페이지), 소유자 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Beacon® Sound System Owners Manual
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
CONDITION
No Sound (power LED off)
No Sound (power LED on)
Shortened Battery Life
Distorted Sound
Excessive Hum or Noise
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM? (Wireless Models Only)
CONDITION
No Sound (RX Indicator: ON)
No Sound (RX Indicator: OFF)
NEED MORE HELP? Beacon Sound System Setup & Operation Videos!
Rated Power Output
150 watts AC / 125 watts DC
Max SPL @ Rated Power 112 dB
Battery
Two 12V rechargeable, 9.0 AH
Full recharge: approx 7 hrs
Frequency Response
60 Hz – 15 kHz ± 3dB
Line Output (post fader) isolated, 600W , 1/4" phone
AC Power Reqs.
100 – 240 VAC, 50/60 Hz, 300W
max
DC Out
12V 500mA
USB
5V 500mA
Dimensions (HWD)
26.25" x 11" x 18" (66.7 x 28 x
45.7cm)
Weight
51 lbs / 23 Kg
POSSIBLE SOLUTION
• turn POWER switch ON
• charge battery or plug in AC cord
• safety shut down if unit overheats, turn volume lower & turn
speaker ON
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using external
speaker output
• charge battery fully; if battery life continues to deteriorate,
contact Anchor Audio customer service: 800.262.4671
• lower system volume control
• use shielded cables
• use balanced microphone
POSSIBLE SOLUTION
• set MUTE switch to on (handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
• push mic power button
• turn Beacon POWER switch on
• make sure transmitter power switch is on
• set receiver and transmitter to same channel
• replace battery in transmitter
Visit Our Website: www.anchoraudio.com
BEACON TECHNICAL SPECIFICATIONS
Mic Inputs:
power
Line In/Out
Sensitivity For Rated Output
Lo-Z Microphone -52 dBV (2.5 mVrms)
Hi-Z Microphone
Auxiliary (line)
Phantom Power
(Specifications Subject to Change Without Notice)
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
Lo-Z (1 KW), balanced, XLR
12 VDC condenser mic (phantom)
Hi-Z (10 KW), unbalanced, 1/4" phone
Hi-Z (10 KW), unbalanced, 1/8" stereo,
1/4" phone
unbalanced, stereo RCA
-43 dBV (7.5 mVrms)
-14 dBV (200 mVrms)
36V
Anchor Audio customer service
800.262.4671
For AdditionAL inFormAtion
visit www.anchoraudio.com
MADE IN USA
SIX YEAR WARRANTY
7