Dream Cheeky LED Message Board 사용 및 설치 지침

{카테고리_이름} Dream Cheeky LED Message Board에 대한 사용 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dream Cheeky LED Message Board 2 페이지. Mac software

페이지 인쇄

LED MESSAGE BOARD

Before using the product, carefully read this manual and retain it for future reference.

This packaging contains:

LED Message Board x 1

Safety

Precautions:

Before using this product, carefully read this manual and retain it for future reference.

Safety:

This product has been designed with the highest concern for safety.

However, any electrical device, if used improperty, has the potential of causing ﬁre, electrical

shock or personal injury. To help ensure accident-free operation, follow these guidelines:

Stop use and unplug the USB cord immediately if the device functions in an abnormal

manner, produces unusual sounds or smells, or becomes too hot.

Use and Handling

1. Do not expose the LED Message Board to high temperatures, high humidity, or direct sunlight.

2. Do not expose the LED Message Board to dust, smoke or steam.

3. Do not allow small particles to get into the LED Message Board.

Installation

Installing the Mac program to operate your LED Message Board couldn't be easier. Just follow these simple instructions and you will

be ready to go in no time!

DOWNLOAD THE LED MESSAGE BOARD SOFTWARE

Go to www.dreamcheeky.com and click on "SUPPORT & DOWNLOAD".

Click on

(software Mac) under the LED Message Board picture

and save the installation disk on your desktop.

Connect the USB cable attached to the LED Message Board to a

USB port located on your Mac prior to running the program.

Note: Install the software before connecting your LED Message Board.

Note: Using a USB hub or docking station may result in a loss of power. This could create the unit to not work properly. Please plug it directly into the USB port on

your computer.

Instruction Manual x 1

4. Do not place the LED Message Board on surfaces that are unstable or subject to vibration.

5. Do not throw or drop the LED Message Board, or subject it to physical shock.

Cleaning:

1. For safety reasons, unplug the USB cord from your computer before cleaning.

2. Wipe gently with a damp cloth, and then dry the surface.

3. Do not use solvents or other chemicals to clean the exterior off the LED Message Board.

General:

1. Should the product exhibit unexpected behaviour, unplug the unit and then restart the

computer.

Note: See www.dreamcheeky.com for full online support and trouble shooting.

Open the LEDMessageBoard.dmg ﬁle and drag the

Board icon into your Applications folder. Drag the LED Files folder

into your Documents

folder,

another

location

where

can easily ﬁnd it.

Open your Applications folder and click on the

Board icon.

A message may appear, telling you this application was

downloaded from the Internet. Click "Open" to start the LED

Message Board program.

Minimum system requirements:

you

Instructions for

Mac software

LED Message