Electrolux 534174 사양 시트 - 페이지 2
{카테고리_이름} Electrolux 534174에 대한 사양 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux 534174 5 페이지. Wt82 warewashing 82′′ multi tank conveyor dishwasher with energy saving device (esd)
페이지 인쇄Electric
Supply voltage:
534174 (WT82AL208)
534175 (WT82AR208)
534176 (WT82AL240)
534177 (WT82AR240)
Dishwasher requires two separate electrical service connections.
Connection 1 for RINSE MODULE; Connection 2 for WASH MODULE.
Refer to below table for Amp requirements.
Connection 1:
208 V/3ph/60Hz
240 V/3ph/60Hz
Connection 2:
208 V/3ph/60Hz
240V/3ph/60Hz
Total Amp Load:
208 V/3ph/60Hz
240 V/3ph/60Hz
Exhaust Requirements
Unit supplied as standard with extended vent hoods
(can be removed during installation if not required).
Exhaust extraction not more than 100 CFM
Refer to installation diagram for minimum exhaust hood
installation height .
Key Information
Productivity racks per hour
(max speed):
Productivity racks per hour
(min speed):
Table to Table connection:
Number of Tanks:
Height with door open:
Charging hole size (width):
Charging hole size (height):
Shipping weight:
Shipping width:
Shipping depth:
Shipping height:
Shipping volume:
Noise level:
Unit predisposed to accept external detergent dispensers, detergent
probes and rinse aid dispensers.
Warewashing
82" " " " " Multi Tank Conveyor Dishwasher with Energy Saving Device (ESD) WT82
208 V/3ph/60Hz
208 V/3ph/60Hz
240 V/3ph/60Hz
240 V/3ph/60Hz
71A
62A
69A
62A
133.8A (44.1kW)
118.9A (44.1kW)
250 racks / 4500 dishes
(average 18 dishes per rack)
150 racks / 2700 dishes
(average 18 dishes per rack)
82-5/8" (2098 mm)
2
83-7/16" (2119 mm)
20-7/8" (530 mm)
19-3/4" (501 mm)
1268 lb (575 kg)
93-5/16" (2370 mm)
40-15/16" (1040 mm)
81-1/8" (2060 mm)
157 cu.ft (4.46 m³)
<70 dBA
82" Multi Tank Conveyor Dishwasher
with Energy Saving Device (ESD) WT82
Water
Inlet Water supply pressure:
Inlet Cold Water Supply Temperature
for rinse section:
Inlet Hot Water Supply Temperature
for wash section:
Inlet Water supply hardness:
Incoming Hot Water line size
(wash section):
Incoming Cold Water line size (rinse): G 3/4"
Drain line size (wash section):
Drain line size (rinse section):
Hot Water consumption: Gallons/hr:
Cold Water consumption: Gallons/hr:
Water consumption/rack:
Wash Temperature:
Wash tank size:
Wash pump power (top wash arms):
Wash pump power (lower wash arms): 1.5 hp (1.2 kW)
Power Rinse Temperature:
Power rinse tank size:
Rinse pump power:
Final Rinse Temperature:
Final Rinse water flow:
Hot water booster capacity:
Initial fill Hot Water requirements:
Warewashing
22 – 102 psi (150 – 700 kPa)
39 – 59 °F (4 - 15 °C)
140 °F (60 °C)
4-8 gpg (7-14 °fH) max
G 3/4"
G 1-1/2"
G 1-1/2"
4 gal/hr (15 liters)
83 gal/hr (315 liters)
0.3 gal/rack (0.75 l/rack)
160 – 172 °F (71-78 °C)
40 gal (150 liters)
3 hp (2.2 kW)
160 – 172 °F (71-78 °C)
6 gal (23 liters)
0.4 hp (0.32 kW)
180 – 194 °F (82-90 °C)
79 gal/hr (300 l/hr)
3.17 gal (12 liters)
40 gal (150 liters)
10-29-08