Commodity Axis ViaAqua EF-4000 UVC 매뉴얼 - 페이지 13

{카테고리_이름} Commodity Axis ViaAqua EF-4000 UVC에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Commodity Axis ViaAqua EF-4000 UVC 16 페이지. Pressure pond filter
Commodity Axis ViaAqua EF-4000 UVC에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)

페이지 인쇄

• The UVC bulb needs to be replaced every 8,000 to 9,000 hours. This

will ensure optimum performance.

• The efficiency of the Terminator

duration the UV light is in contact with water. Thus the rate of water

flow, not the way the water travels, will relate to the efficiency of the

UVC sterilizer.

UVC BULB REPLACEMENT

• Unscrew the threaded UVC bulb cap on the end of the UVC sterilizer.

Once unscrewed, the inside of the cap will reveal the UVC bulb socket.

• Remove the UVC bulb from the box. Important: Do not touch the quartz

area of the bulb. If needed use a clean cloth to handle the bulb.

• Align the pins with the holes in the bulb socket. Press the bulb directly

into the holes in the bulb socket. Avoid all angles, failure to do so may

cause permanent damage to the bulb and/or the bulb socket.

• Screw cap back onto the UVC sterilizer.

Lid and Bulb Socket

UVC Sterilizer depends on the

™

UVC PL Bulb

Quartz Sleeve

Reaction Chamber