Commodity Axis ViaAqua EF-6000 UVC 매뉴얼 - 페이지 7

{카테고리_이름} Commodity Axis ViaAqua EF-6000 UVC에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Commodity Axis ViaAqua EF-6000 UVC 16 페이지. Pressure pond filter
Commodity Axis ViaAqua EF-6000 UVC에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)

페이지 인쇄

CONNECTION

Requires either 1.25" ID or 1.5" ID tubing. It is important to choose the largest

diameter ID tubing possible. Tubing and hose clamps are not included.

1. Connect the barbed fitting to the filter's intake and output.

2. Contact Tubing to the Pressure Pond Filter:

• Inlet: Connect tubing from the ViaAqua

intake of the filter. Then secure with a hose clamp.

• Outlet: Connect tubing from the filter back to the pump or water

features. For maximum circulation, place the output and water

pump as far a part as possible. It is not recommended to place them

next to one another.

3. Turn the flow control knob pointing to the intake port.

4. Drain: Remove cap.

5. Connect barbed fitting with a piece of tubing secure with a hose clamp.

6. To activate backwash turn off the pond pump and swith the flow control

knob so that the arrow points to the backwash/drain discharge port. Turn

the pond pump back on. Drain the water into a sewage system or garden.

pond pump to the barbed

backwash port

Sewage System

Pond Pump

Point knob

to the

or Garden