Anchor AF-1502 빠른 설정 매뉴얼 - 페이지 6

{카테고리_이름} Anchor AF-1502에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor AF-1502 11 페이지.

STEPS

1. Choose Filter Location

The first step of water filter installation is to choose a location that

is easily accessible - the unit will need to be accessed regularly to

change the filter cartridges regularly, so be sure no obstacles

interfere with installation.

Protect the system against extreme weather - operating

temperature range is 40° -100° F.

Select a position near the main water shut-off valve, before the line

splits or meets the hot water heater.

If you have a water softener installed, the whole house filtration

system should be installed after that.

Keep in mind that a filter mounting bracket will be secured to the

home structure, such as a wall. Make sure the wall can support

weight of the system when full of water.

Ensure the unit is at least 3

inches above ground. This

will make it easy to open

housings

replacement

2. Cut the Pipe

Turn off the main water supply.

Measure length of the unit and mark the pipe at exact locations

where the filter will be placed. Leave space for shut-off valves on

either sides also if that is to be installed.

Use a tube cutter to make cut at the marks and remove the

section. Place a bucket below the pipe at the location for any water

remaining in the water line.

for

filter