Commodity Axis ViaAqua Terminator UVS 13 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Commodity Axis ViaAqua Terminator UVS 13에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Commodity Axis ViaAqua Terminator UVS 13 8 페이지. Uv sterilizer
페이지 인쇄
INSTALLATION OF UV PL BULB
Follow all safeguards and warnings
1.
Unscrew the threaded PL bulb cap on the end of the ultraviolet sterilizer.
2.
Once unscrewed the inside of the cap will reveal the PL light bulb socket.
Remove the PL ultraviolet bulb from the box. Important: Do not touch the
3.
quartz part of the bulb. If needed use a clean cloth to handle the bulb.
Align the pins with the holes in the bulb socket. Press the bulb directly
4.
into the holes in the bulb socket. Avoid all angles; failure to do so may
cause permanent damage to the bulb and/or the bulb socket.
Screw cap back onto the UV sterilizer.
5.
PART LIST
1. Cap and PL bulb socket
2. PL UV bulb
3. Quartz sleeve
4. Main body
5. Compression nut (2)
6. 1 1/4" barbed fitting with gasket (2)
7. 1-2" - 1" barbed fitting with gasket (2)
8. Ballast
9. Mounting bracket (2)