Carlson 0930PW 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Carlson 0930PW에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carlson 0930PW 18 페이지. Walk-through assembly gate with small pet door
Carlson 0930PW에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지), 소유자 매뉴얼 (16 페이지)

페이지 인쇄

Assembling and Installing Your Gate

NOTE: You will notice a slight gap between the gate door latch and the

frame. This is not a defect. Your gate is a pressure mounted gate and

this gap will disappear once you tighten your gate in its opening.

STEP 1

Locate the (4) threaded spindle rods.

Rotate the adjustment wheels along

the threading, eliminating the gap

between the adjustment

wheel and the rubber foot.

ADJUSTMENT WHEEL

RUBBER FOOT

STEP 2

Insert the (4) threaded spindle

rods into the holes at each of

the four corners of the gate.

NOTE: The ends of the gate frame are not threaded. The threaded spindle

rods should slide into the end of the frame tubes without any resistance.

ENGLISH