Carlson 0930PW 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Carlson 0930PW에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carlson 0930PW 16 페이지. Walk-through assembly gate with small pet door
Carlson 0930PW에 대해서도 마찬가지입니다: 소유자 매뉴얼 (18 페이지), 사용 설명서 (14 페이지)

페이지 인쇄

STEP 4

When you are satisfied with the general placement of your gate, fully tighten the threaded

spindle rods attached to the lower corners of the gate by further rotating the adjustment wheels.

Continue by tightening the upper threaded spindle rods. As you tighten the threaded spindle

rods, you will notice the gap between the door frame and the easy slide latch begin to narrow.

In order for the gate to function properly, stop tightening the upper threaded spindle rods just

before the outer housing of the easy slide latch and the receiving component touch.

RECEIVING COMPONENT

OUTER HOUSING

NOTE: There should be equal spacing among each of the (4) threaded spindle rods. Make the

appropriate adjustment to ensure you have installed your gate safely.

ENGLISH