Athena 2000 Series 사용 설명서 - 페이지 9

{카테고리_이름} Athena 2000 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Athena 2000 Series 20 페이지. Temperature/process controller
Athena 2000 Series에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

페이지 인쇄

Front Panel Layout

Output Function

Switches

NOTE:

—SWITCH NO. 4 IN "ON" POSITION IS FOR: "B" OR "T" OUTPUTS WHEN DRIVING MECHANICAL

DEVICES, E.G., CONTACTORS.

—SWITCH NO. 4 IN "OFF" POSITION IS FOR "T", "F", OR "S" OUTPUTS WHEN DRIVING DEVICES

THAT CAN WITHSTAND RAPID CYCLING, E.G., SOLID STATE DEVICES, SOLENOIDS, ETC.

Layout of the front panel is shown below. To reach the adjust-

ments, swing the top of the door forward and down. The pro-

portional band adjustment is on the right side and sets the

gain of the controller. The offset (manual reset) adjustment is

on the left and corrects for offsets from the setpoint tempera-

ture. The output indication (LED) can be seen through a win-

dow in the door.

Units ordered with Option A (3-Mode PID) will not have a

manual reset adjustment. Instead, these units have an auto-

matic rate adjustment on the front panel and an automatic

reset selector switch inside the unit.

Output Function Switch Chart

Figure 5: Output Function Switch Chart