AnchorRescue AR200 사용 설명서 - 페이지 3

{카테고리_이름} AnchorRescue AR200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnchorRescue AR200 6 페이지. Anchor retrieval system

brought over the bow roller and secured

normally.

10. Replace any missing cable ties once the

anchor is stowed safely. The

AnchorRescue is now ready to protect the

anchor from a snag the next time you

deploy the anchor.

11. Before returning the retriever to its nylon

bag rinse it with fresh water if available.

Again, check the capture pins to ensure

they are moving freely before storing the

retriever.

12. If the capture pins do not move freely, it

may be necessary to remove them and

flush out any trapped mud or debris in the

pin passage. Simply remove the retaining

screws, capture pins and springs. Then,

flush the passages with clean water,

visually inspect them, and reassemble. Do

not over tighten the screws and make sure

the screw head is even with or slightly

below the surface of the retriever. Again,

check for free movement of the pins.

Note: Be careful not to lose the

capture screws, pins, and springs.

Scanmar International, Inc.

www.anchorrescue.com

Phone

510-215-2010