AnchorRescue AR300 사용 설명서 - 페이지 6

{카테고리_이름} AnchorRescue AR300에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AnchorRescue AR300 6 페이지. Anchor retrieval system

Tether Chain Installation with Roll Bar

Anchors

1. There are two popular roll bar-style anchors, e.g. the Manson

and Rocna. For these anchors, an extra length of tether chain

is required. Scanmar offers a supplemental tether extension

kit that includes an extra length of appropriately sized chain

and a special connector link for joining purposes.

Note: The tether chain extension kit can be ordered with the

AnchorRescue system or separately.

2. For roll bar-style anchors, it is recommended that the tether

chain run from the shank, over the roll bar, and attach to the

anchor's trip. During retrieval of a fouled anchor this

effectively transfers the lift point to the crown of the anchor.

The AnchorRescue is available in three different

Note:

model sizes: (AR100, AR200, AR300) that correspond with

anchor chain sizes of: 1/4"-5/16" (6-8mm), 3/8" (10mm),

and 1/2" (12mm). Accordingly, the AR100 includes a 34"

(864mm) tether chain, the AR200 includes a 44" (1118mm)

tether chain, and the AR300 includes a 54" (1372mm) tether

chain. These chain lengths are sized to fit most anchors

except for the roll bar-style anchors such as Rocna and

Manson-style that need an extra 20 – 24" (508-610mm) of

chain.

Scanmar International, Inc.

www.anchorrescue.com

Phone

510-215-2010