Dream On Me 598 조립 지침 매뉴얼 - 페이지 6

{카테고리_이름} Dream On Me 598에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dream On Me 598 7 페이지.

FURNITURE TIPPING DETERRENT HARDWARE

Tipping furniture may injure young children. Use of this tipping restraint hardware is highly

recommended.

When properly instated this hardware could provide protection against the unexpected

tipping of furniture due to improper use.

This hardware is only a deterrent.Adult supervision is the only proper deterrent to prevent

improper use of any potentially hazardous product.

1. Attach one of the mounting brackets securely to the back top edge of the furniture using

the short screw.

2. Find the stud in the wall and mark the location on the wall for mounting the second

bracket using a 2" wood screw approximately 2" below the bracket mounted to the edge

of the furniture.

3. If a stud cannot be found,purchase a "Hollow-Wall Anchor Bolt" and attach the second

bracket to the wall using that bolt.Make sure to follow all instructions by the manufacturer.

4. Place the furniture so the bracket on the back edge is in line with the bracket on the wall.

5. Lace an end of the nylon restraint strap down through each bracket.Bring both ends

together and slide the beaded end of the strap through the key hole shaped slot in the

other end tightly.Pull down on the beaded end until it snaps locks into the keyhole.

6. Check to make sure the strap is securely laced and locked to the brackets.

WARNING

HOW TO LOCK

MADE IN CHINA