Athena 2000 Series 운영 매뉴얼 - 페이지 2

{카테고리_이름} Athena 2000 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Athena 2000 Series 16 페이지. Temperature/process controller
Athena 2000 Series에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

Introduction

Congratulations on your purchase of an Athena® Series 2000 analog temperature controller. It is a U.L.

listed, 1/4-DIN controller for use in a variety of applications. Standard features include time proportioning

with auto-adjusting cycle time, adjustable bandwidth (for on-off to wide band proportioning), and offset

(manual reset). Outputs include relay, triac, or mAdc types.

If you have questions or require any assistance with your controller or with any temperature control problem,

please contact your Athena representative.

Precautions

After unpacking, inspect the instrument for any physical damage that may have occurred in shipping. Save

all packing materials and report any damage to the carrier immediately.

Locating

Select a location for the controller where it will not be subject- ed to excessive shock, vibration, dirt, moisture

or oil. The ambient temperature of the area should be between 30° and 130° F. (Dust, oil, water resistant

cover is available to protect from harsh environments. Contact factory for details.)

Approvals

E66598 Temperature Indicating and

Regulating Equipment.

Safety Warning

In addition to presenting a potential fire hazard, high voltage and high temperature can damage equipment and

cause severe injury or death. When installing or using this instrument, follow all instructions carefully and use

approved safety controls. Electrical connections and wiring should be performed only by suitably trained personnel.

Do not locate this instrument where it is subject to excessive shock, vibration, dirt, moisture, oil, or other liquids. The

safe operating temperature range for this unit is 32°F to 140°F (0°C to 60°C).

This unit has been tested and found to be compliant with "NEMA Type 4X Enclosure - For Indoor Use Only." When

properly installed, this controller will maintain the integrity of a NEMA enclosure and remain "Watertight." This rating

is only applicable when the controller is properly installed into a suitably rated NEMA Type 4X housing.

E66598 Temperature Indicating and

Regulating Equipment.