Carlson 0937 PW 어셈블리 - 페이지 4

{카테고리_이름} Carlson 0937 PW에 대한 어셈블리을 온라인으로 검색하거나 PDF를 다운로드하세요. Carlson 0937 PW 14 페이지. Extra wide walk-through gate with small pet door

Positioning and Attaching the Wall Cups

STEP 1

After you have mounted your gate, and you are satisﬁed

with its positioning, draw a circle on the surface of your

doorway or opening around the perimeter of the (4)

rubber feet. Next, completely remove the gate from the

opening by loosening each of the (4) threaded spindle

rods to depressurize the gate.

Adding a Gate Extension

STEP 1

STEP 2

With the gate fully removed, you can now use the

circles you marked during Step 1 as guides for screwing

in your (4) wall cups (B). Center each of the wall cups

within the guide circles and use the provided

self-tapping screws (C) to fasten them in place via the

hole through the center of each wall cup.

Remove the top and bottom threaded spindle rods.

Assemble the gate and extension as illustrated. Reposition the gate and ﬁt in

accordance with the gate ﬁtting instructions.

It is preferable to install any extensions on the hinge side of the gate.

NOTE:

STEP 3

Reinstall your gate in the doorway or opening

according to the instructions, using the newly

installed wall cups as anchoring points for the (4)

threaded spindle rods.