ancnoble WSF-01A 사용자 설명서 - 페이지 5

{카테고리_이름} ancnoble WSF-01A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ancnoble WSF-01A 9 페이지. Self-refill / drain auto waterer

ANC Technology

Note: Please make the waterer front level is a little higher than back level for

easier drain, and please also make sure that tilt would not more than 5 degrees.

Otherwise will cause the seal plunge not seal well.

3. Then screws the steel plunge into the end of the chain. When the motor is

released fully, the plunge should be well pressured to the bottom seal. Fig 4

Fig 4

4. Install the float. Unscrew nut on the float, put the thread of the float throught the

hole of the water spenser, then srew the nut back again to the float thread which

will hold the float to the body of the waterer. User can adjust angle of the float

through the adjusting button, so to adjust water level of water dispenser. Suggestion

put float flat. Fig5