Formax AutoSeal FD 1500 Plus 운영자 매뉴얼 - 페이지 11

{카테고리_이름} Formax AutoSeal FD 1500 Plus에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax AutoSeal FD 1500 Plus 14 페이지.

TROUBLESHOOTING

Fold quality needs improving:

1. Make sure paper is squared and installed correctly. Side guides should be evenly

balanced and snug against the paper.

2. If folds are still incorrect, adjust fold plates (see fold plate adjustment on page 4).

Paper is not folding square (Skewing):

1. If paper pulls left or right, adjust the skew adjuster. To adjust the skew, turn the

skew adjuster (figure 9) left or right until the paper is feeding correctly.

Ready light is not illuminated and power is on:

1. Press the black button (figure 6) near the power cord inlet to reset the breaker.

Ready light is blinking red:

1. Check that the top cover is installed properly.

2. Check to be sure the photo-eye, before the metal sealer rollers, is clear of forms and/or

paper dust.

Figure 9

MyBinding.com

5500 NE Moore Court

Hillsboro, OR 97124

Toll Free: 1-800-944-4573

Local: 503-640-5920