Formax AutoSeal FD 2052 운영자 매뉴얼 - 페이지 12
{카테고리_이름} Formax AutoSeal FD 2052에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax AutoSeal FD 2052 12 페이지.
페이지 인쇄
OPTIONAL CONVEYOR INSTALLATION
To install the 18" conveyor, follow these steps:
1. Unplug the 2052 from the wall outlet.
2. Remove the catch tray from machine.
3. Remove the upper fold table.
4. Plug the power cord into the underside of the conveyor.
5. Install the conveyor mounting bolts (figure 7).
5. Attach the conveyor to the 2052.
6. Install the stacker wheel assembly into the holes indicated below (figure 8).
7. Adjust the stacker wheels to conveyor decal.
8. Plug the conveyor power cord into the power outlet on the 2052.
9. Reinsert the upper fold table.
10. Plug the 2052 into the wall outlet.
Figure 7
Figure 8
Mounting Bolts
Holes For Stacker Wheel
Assembly
Stacker Wheels
10