Formax FD 340 운영자 매뉴얼 - 페이지 10

{카테고리_이름} Formax FD 340에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax FD 340 13 페이지. Document folder
Formax FD 340에 대해서도 마찬가지입니다: 운영 매뉴얼 (10 페이지)

CROSS FOLDING

Cross folding refers to folding a document in one pass and then running it through the folder a second time to

be folded again

Common Application: Folding an 11" x 17" document in half and then letter folding it to ﬁ t in a standard #10

envelope.

1. Load folded paper into the feed tray with the fold

crease facing the non-operator side of the folder (Fig

11).

Note: For best results ﬁ rmly run your hand over the fold

crease to help ﬂ atten the paper before loading.

2. Attach the cross fold paper guide onto the feed tray

paper guide (Fig. 12) and lower guide.

Note: Cross folding ability will vary based on the paper

weight and type. If the paper is too heavy it may not be

able to be cross folded.

Move the stacker wheels to the proper position indicated on the chart based on the fold and paper size. For

paper between 28# and 65#* refer to the "Stacker Wheel Setup For Thick Paper" on Pg. 7.

8.5" x 11" 8.5" x 14"

Letter

Zig-Zag

Single

Gate

Fold Out

Double ll

A or B

Fold Crease

Fig. 11

Fig. 12

To install cross fold guide hook tab "A" into slot "A"

and then lower tab "B" into slot "B"

11" x 17"

A or B

Cross Fold Guide

Tab "B"

Tab "A"

Slot "B"

Slot "A"

Stacker Wheels