Formax FD 342 운영자 매뉴얼 - 페이지 11

{카테고리_이름} Formax FD 342에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax FD 342 15 페이지.
Formax FD 342에 대해서도 마찬가지입니다: 지침 (2 페이지)

CROSS FOLDING

Cross folding refers to folding a document in one pass and

then running it through the folder a second time to be folded

again.

Common Application: Folding a 11" x 17" document in half

and then letter folding it to fit in a standard #10 envelope.

1. Load folded paper into the feed tray with the fold

crease facing the non-operator side of the folder

(Fig 10a).

Note: For best results, firmly run your hand over the

fold crease to help flatten the paper before loading.

2. Attach the cross fold paper guide onto the feed tray

paper guide (Fig. 10b) and lower guide.

Note: Cross folding ability will vary based on the paper

weight and type. If the paper is too heavy it may not

be able to be cross folded.

Note: The guide can be convientlly stored under the

lower fold table when not in use (Fig 10c).

STACKER WHEEL POSITIONING GUIDE

Move the stacker wheels to the proper position indicated on the chart based on the fold and paper size (Fig 11a and 11b).

8.5" x 11" 8.5" x 14"

Letter

Zig-Zag

Single

Gate

Fold Out

Double ll

Fig. 11a

Stacker wheels decal

A or B

Fig. 10a

Fig. 10b

To install cross fold guide hook tab "A" into slot "A" and

then lower tab "B" into slot "B"

Fig. 10c

11" x 17"

A or B

Fig. 11b

Fold Crease

Cross Fold Guide

Tab "B"

Slot "B"

Cross fold guide storage

Tab "A"

Slot "A"

Stacker Wheels