Formax FD 342 운영자 매뉴얼 - 페이지 6

{카테고리_이름} Formax FD 342에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax FD 342 15 페이지.
Formax FD 342에 대해서도 마찬가지입니다: 지침 (2 페이지)

UNPACKING & SETUP

Check package for shipping damage. If there is shipping damage, do not discard the box.

Remove the machine and packed components from the box. The fold plates, telescoping stacker, Optional Multi

Sheet Feeder if ordered, power cord and cross-fold guide are wrapped separately in the box.

NOTE: Two people must lift the machine from the box.

Place the folder on a solid stand.

Install upper and lower fold plates, telescoping conveyor

multi-sheet feeder and power cord

Be sure the plates are set firmly on the locating pins

(Fig 1a & 1b). Slide each fold plate in until it meets the

first locating pin then push down to set in place.

Repeat the same steps for the lower fold plate.

Insert the telescoping extension tray into the end of the

outfeed conveyor (Fig. 2).

Upper Fold Table Pins

Fig. 1a

Lower Fold Table Pins

Fig. 1b

Fig. 2

Locating Pins

Telescoping extension tray