Formax FD 540 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Formax FD 540에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax FD 540 17 페이지. Burster

6. Place the stacker wheel assembly on the stacker wheel

adjustment rack. (Fig. 5)

7. Place urge roller on stacker tray so that it rests on the stacker

grill. (Fig.6)

ASSEMBLY INSTRUCTIONS FOR

INFEED BRUSH ASSEMBLY

FOR FD546-40 AND FD546-50 ONLY

Tools Required:

Medium Phillips Screwdriver

Parts Required:

1 - Infeed Brush Assembly

(Packed with Burster)

4 - 6-32 Phillips Pan Head Screws

(Packed in Accessory Box)

1. Unpack the infeed brush assembly and inspectfor damage.

2. Place the infeed brush assembly, with the bar on top to the

infeed end of the burster.

3. Align the holes in the infeed brush assembly with the threaded

holes in the burster side frames.

4. Insert all four screws without tightening them, once they are all

in, tighten them with a medium phillips screwdriver.