Formax FD 402TA1 운영자 매뉴얼 - 페이지 8

{카테고리_이름} Formax FD 402TA1에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax FD 402TA1 9 페이지. Tabletop air jogger

· In general, for thick paper, the tilt angle is adjusted vertically and for thin paper, it is

adjusted horizontally.

4-2 How to jog

· Turn the Jogging switch to begin jogging and the Air switch for air blowing, and touch the

upper part of paper stock to help it jog neatly.

· Make sure that the thickness of paper stock is less than 60mm

5. Troubleshooting

Trouble

Paper is not jogging

The paper size is larger than specification

neatly

Paper is irregularly

Paper has static electricity

jogged.

Too much paper loaded

No vibration or air

· If the fuse is blown again, an abnormality exists in the machine. Contact your dealer.

For thin paper

Possible cause

Power switch is set to OFF

Fuse is blown

Jog it by holding with hand gently resting

on top edge of paper.

Use the air blower in addition to vibration

function.

Reduce size of paper stack.

Set the power switch to ON

Replace the fuse.

Solution