Formax FD 90 운영자 매뉴얼 - 페이지 11

{카테고리_이름} Formax FD 90에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax FD 90 11 페이지. Rotary perforators
Formax FD 90에 대해서도 마찬가지입니다: 운영자 매뉴얼 (11 페이지)

TROUBLESHOOTING

The machine won't start but the red LED

is on:

Paper gets crumpled inside the machine: Open the upper cover (5) and remove the paper from the machine.

Several sheets are fed simultaneously:

The perforated cut is wide and frayed:

The machine gets jammed:

MAINTENANCE

Clean the machine once a month to remove dust and other impurities, concentrating on the inside of the machine, especially

in the area near the electric motor.

Be sure the upper cover (5) is closed properly and that the optical sensor on

the input feeding table operates properly (1).

Be sure the feed roller turns freely and that it remains in the proper position,

(Figure A, pg 5).

Adjust the pressure of the separator (30) using the adjustment wheel (31).

Be sure the blades are sharp and set the clearance between both tools. Both

tools must touch each other on the external, i.e. not beveled side (see Figure

A, pg 5).

Check all mobile parts under the cover (5).

Be sure the blades are sharp and have not been crossed or misaligned.

MyBinding.com

5500 NE Moore Court

Hillsboro, OR 97124

Toll Free: 1-800-944-4573

Local: 503-640-5920