Dream Vision Eos Series 매뉴얼 - 페이지 3

{카테고리_이름} Dream Vision Eos Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dream Vision Eos Series 4 페이지.

• Select the "Software Update" in the menu. A confirmation screen asking whether to

start the software update appears.

• Before confirming the upgrade, check the required time. Then select "Yes" to confirm

the beginning of the upgrade procedure.

CAUTION: !!! Do not turn off the projector or remove the USB drive while updating.

Interrupting the update may cause the projector to malfunction !!!

• Once the required time is reached and that the update is completed, the projector will

automatically turn off and all the LED indicators will go out.

• You can turn on the power again, by pressing the [Power] button on the projector.

Alternatively, you can press any button on the RCU to exit the standby state and then

press the [ON] button to switch this projector on.

Checking the new Firmware Version after the upgrade procedure:

• Turn on the projector and go into the Menu and browse to Menu > Information Menu.

You can also press the "INFO" button on the RCU to direct access this menu.

• The current firmware version is displayed at the "Soft Ver." line. If the version number

is the same as the Firmware file version, then the upgrade procedure has been

successful.

Menu > Function > "Software Update"

page 3