Formax AutoSeal FK Series 운영자 매뉴얼 - 페이지 11

{카테고리_이름} Formax AutoSeal FK Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax AutoSeal FK Series 18 페이지.
Formax AutoSeal FK Series에 대해서도 마찬가지입니다: 운영자 매뉴얼 (12 페이지)

페이지 인쇄

Make copies of this page on copy paper for fine tuning folds

Instruction For Lining Up Folds

1. Place a stack of these sheets into the feeder and fold

one (1) or two (2) sheets.

2. Take a folded sheet from the catch tray and lay it on

top of a pressure seal form lining the leading edge of

this sheet up with leading edge of the pressure seal

form.

If the folds on this test sheet do not line up with the

perforated folds on the form, the fold plates need to

be adjusted up or down to make the folds line up.

Refer to Fig. 16 for a "Z" fold and Fig. 17 for a "C"

fold.

If fold "A" on the test form is right of the perforation on

the pressure seal form move the top fold plate stop

up. If fold "A" is below move the top fold plate stop

fold stop down.

If fold "B" on the test form is right of the perforation

on the pressure seal form move the bottom fold plate

stop down. If fold "B" is to the left move the bottom

fold plate stop up.

Leading Edge

Fig. 16 "Z" fold Form

Fig. 17 "C" Fold Form

Fold "A"

Fold "B"

Fold "A"

Fold "B"

Leading Edge