Formax AutoSeal FK Series 운영자 매뉴얼 - 페이지 6

{카테고리_이름} Formax AutoSeal FK Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Formax AutoSeal FK Series 18 페이지.
Formax AutoSeal FK Series에 대해서도 마찬가지입니다: 운영자 매뉴얼 (12 페이지)

페이지 인쇄

UNPACKING AND SET UP, continued

5. To attach the conveyor to the out-feed, align the tab on the right side of the conveyor with the slot

on the machine (Figure 1a). Rest the support braces on the two alignment studs (see arrows), and

tighten the four thumbscrews provided (Figure 1b).

Tab and slot

Figure 1a

Figure 1b

3. Install outfeed wheels (Fig. 1c) by inserting the right side (spring loaded) into the right side of the

body, just above the conveyor (Fig 1d), then insert the left end of the outfeed wheel crossbar into the

left side.

4. Plug cord into machine and into wall outlet.

Spring-loaded end

Figure 1c

Figure 1d