Athena Power AP-TFX35 사용자 설명서 - 페이지 7

{카테고리_이름} Athena Power AP-TFX35에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Athena Power AP-TFX35 10 페이지. Athena tfx power supply user manual

FAQs

Why is my 24 ATX pin connector too big for my motherboard?

Some Dell and HP motherboards were designed speciﬁcally with a mini ATX 24 connec-

on and the FlexATX although a replacement and upgrade for slim and mini-ITX

systems was designed with the standard 24 pin ATX connector. Athena Computer

Power addresses this problem by oﬀering a convertor cable available online or at your

local retail stores. Please visit h p://athenapower.com/product/converteradapter-

cable/replacement-cable/cable-atx20m24h for more informa on.

My motherboard only needs a 20 pin ATX connector the FlexATX only has a

24 pin connector, what should I do?

Athena Power has taken this issue into considera on and has provided a 20+4 pin

connector. What that means is that the connector head itself can be used for a 24 pin

ATX motherboard or a 20 pin ATX motherboard.

I have two 4 pin connectors what are they used for?

These are designated as EPS connectors and can serve as a connector for a P4 12V

connec on or a ached together and used as an EPS8 Pin connector depending on your

needs.

Why did my fan stop spinning?

The TFX is built with a thermal fan speed controller which means that depending on

the heat of your system, the fan will spin accordingly. If your system remains at a low

temperature the fan may stop spinning altogether, if you no ce that your system is

indeed hot to the touch and the fan is not spinning, please remove the power supply

from your system and conduct a simple test.

To conduct a simple test, please use a metal paperclip to short the green wire and any

black wire on the 24 pin ATX connector. (see diagram below) This will send a signal to

your PSU to start opera ng a er you connect the power cord into the wall jack. Once

you have conducted this procedure please check PSU to observe if the fan is spinning

or not; if it is not spinning, please contact our service department immedeately at

(626) 810-5008.

GREEN

BLACK