Athena Power BP-SATA2221B 사용자 설명서 - 페이지 2

{카테고리_이름} Athena Power BP-SATA2221B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Athena Power BP-SATA2221B 3 페이지.

Picture B

B1: SATA 15pin power connector.

B2: SATA 7pin data connector for HDD 0.

B3 SATA 7pin data connector for HDD 1.

Safety Lock

Upper HDD Safety Lock & Lower HDD Safety Lock. (Push right to open & left

to lock.) See Picture C.

Picture C

HDD Installing

Open the upper & lower cover and put the HDD inside the cage. You can

install one HDD or two HDDs. (See Picture D)

Picture D

Hardware Installation Procedures

Please follow the following procedures to complete the hardware

installation:

1) Open the package and take out the product and make sure the

product is brand new and all the necessary parts are included. If

damage or shortage occurred, please contact your distributor or

where you bought.

2) Unlock the upper and lower cover (See Picture C), push the lock

rightward and open the two covers and then, put the two 2.5" SATA

HDD inside the box (See Picture D).

3) After both HDDs installed, push both covers back like Picture C and

then, push the lock button leftward to lock both covers to secure

the HDD inside properly.

4) Then, mount the BP-SATA2221B on the 3.5" space using the

included screws to mount it on the device (desktop, case..., etc.) and

make all the cable connected properly and it is ready for use.

5) See the drawing the two ways to mount BP-SATA2221B on the

device. (See Picture E)