Ancona Le Duo 매뉴얼 - 페이지 2

{카테고리_이름} Ancona Le Duo에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ancona Le Duo 6 페이지. Faucet

Installation size map

Single Hole Installation

A. Turn off water supplies and drain lines.

B. Clean installation site, remove any debris from

the area.

Spout body

C. Place faucet with Gasket(1) into singe hole deck.

D. Assemble Rubber Washer(4), brass for metal

washer(5), and threaded Lock-Nut(6) on to

Shank(2) from underside of sink or mounting surfaces.

E. Hand-tighten Lock-Nut(6), use a screwdriver to

tighten Screws(7) on Lock-Nut(6).

F. Work your way around Lock Nut(6). Tightening the

Sink Deck

screws sightly each time until all are snug to ensure

even pressure.

Three Hole Installation

Test Faucet Installation

A. Move handle into "OFF" position.

B. Turn on water supplies. Check connections for leaks.

C. Remove hand shower and let both hot and cold water

run for one minute. This will help clean any debris that

might otherwise clog the system. Replace hand shower.

D. Operate handle up and down, in cold and hot positions,

to flush water lines thoroughly.

Simply rinse the surface with clear water or

mild liquid detergents if necessary Dry the

Maintenance:

faucet with a clean soft cotton cloth Do not

use any cleaning agents containing

acids polish abrasives or harsh cleaners

Step 1: Insert plate (1) and rubber

washer (2) before inserting spout

body into sink deck.

Step 2: Repeat steps D to F from

Single Hole Installation.

Step 3: Secure plate (1).

Step 4: Securing all connectors:

Ensure all connections are

tightly set in place to avoid

leakage.